Kramer TP-588D, Руководство пользователя

Страница: 15 / 42

TP-588D - Operating the TP-588D 11
11
6 Operating the TP-588D
6.1 The Setup 4-way DIP-switch
A DIP-switch that is up is off; a DIP-switch that is down is on. DIP-switches are off
by default.
# Feature Function Switch State
1 EDID Control Determines from which
output to read the EDID Off
—EDID source is dictated by DIP-switch 2
(up, default)
On
—EDID is locked (down)
2 EDID Priority Determines from which
input to read the EDID Off
—EDID is read from Output 1 HDMI (up,
default)
On
—EDID is read from Output 2 DVI (down)
3 Output Timeout
Shutdown
Enable Enables and disables the
output timeout shutdown
when the input signal is lost Off
—Always on, no shutdown (up, default)
On
—5 minutes (down)
4 Extra Range Enables/disables the extra
range function Off
—Disabled (up, default)
On
—Enabled (down)
6.2 Locking the EDID
You can lock the current EDID to prevent the EDID from being updated
automatically when a new display is plugged in.
When the EDID is not locked:

Any new EDID is written to non-volatile memory and is preserved through a
power cycle

The EDID from the output is transferred to the input when the new acceptor
has a higher priority than the currently connected acceptor

The default EDID is used in any case where there is no valid EDID
When the EDID is locked a new EDID cannot override the locked EDID.
Note : Performing a factory reset overrides the EDID even when the EDID is locked.