Kramer TP-588D, Руководство пользователя

Страница: 14 / 42

10 TP-588D - Connecting the TP-588D
3. Connect the RS-232 Data 3-pin terminal block on the TP-588D to the
RS-232 controlled device, (for example, the projector).
4. Connect the Audio Out S/PDIF digital, RCA audio connector on the
TP-588D to the audio acceptor, (for example, an audio amplifier with
speakers).
5. If the device is not supplied power by a PoE provider, connect the power
adapter to the TP-588D and to the mains electricity, (not shown).
5.1 Connecting a Device to the TP-588D via RS-232
To connect a serial device to the TP-588D for data or control:

From the RS-232 9-pin D-sub serial port on the remote device connect:

Pin 5 to the GND pin on the TP-588D RS-232 terminal block

Pin 3 to the RX pin on the TP-588D RS-232 terminal block

Pin 2 to the TX pin on the TP-588D RS-232 terminal block
5.2 Connecting a Balanced/Unbalanced Stereo Audio
Device
Figure 4 and Figure 5 illustrate how to connect a balanced and unbalanced stereo
audio device to the Audio Out 5-pin terminal block.
Figure 4: Balanced Stereo Audio
Connection Figure 5: Unbalanced Stereo Audio
Connection