Kramer KDS-SW2-EN7 Скачать руководство пользователя страница 8

Страница: 8 / 79

Kramer Electronics Ltd.

KDS-SW2-EN7

– Mounting KDS-SW2-EN7

Mounting KDS-SW2-EN7

This section provides instructions for mounting

KDS-SW2-EN7

. Before installing, verify that

the environment is within the recommended range:

•

Operation temperature

– 0



to 40



C (32 to 104



F).

•

Storage temperature

– -40



to +70



C (-40 to +158



F).

•

Humidity

– 10% to 90%, RHL non-condensing.

Caution:

•

Mount

KDS-SW2-EN7

before connecting any cables or power.

Warning:

•

Ensure that the environment (e.g., maximum ambient temperature & air flow) is

compatible for the device.

•

Avoid uneven mechanical loading.

•

Appropriate consideration of equipment nameplate ratings should be used for avoiding

overloading of the circuits.

•

Reliable earthing of rack-mounted equipment should be maintained.

•

Maximum mounting height for the device is 2 meters.

Mount KDS-SW2-EN7 in a rack:

•

Use the recommended rack adapter

(see

www.kramerav.com/product/KDS-SW2-EN7

Mount KDS-SW2-EN7 on a surface using one of the following
methods:

•

Attach the rubber feet and place the unit on a flat surface.

•

Fasten 2 brackets (included) on each side of the unit and attach it
to a flat surface. For more information go to

www.kramerav.com/downloads/KDS-SW2-EN7

Содержание KDS-SW2-EN7
















































































Результаты поиска

Содержание KDS-SW2-EN7

Отзывы:

Похожие инструкции для KDS-SW2-EN7

Бренды по названию

Популярные бренды

Kramer KDS-SW2-EN7, Руководство пользователя

Результаты поиска

Содержание KDS-SW2-EN7

Отзывы:

Похожие инструкции для KDS-SW2-EN7

Бренды по названию

Популярные бренды