K-CONFIG –
Defining the Control Room via the Project Navigator
85
This program layer will associate triggers sent from the virtual keypad UI application to the Master room controller for
triggering the program-configured series of control actions. Once you have created a virtual keypad device layout, it
can be shared using the Import/Export XML function under the File menu.
After adding a Virtual Device to the room control tree (you can add up to two virtual devices, as determined by the
Master room controller), the keypad area shows the basic Virtual Device panel, that includes 12 buttons and three
configurable text labels:
Figure 150: The Basic Virtual Device Front Panel
6.4.1
Edit the Device View
Right-click the virtual device icon in the
Project Navigator
area and select Edit Device View to open the
VIRTUAL
DEVICE PROPERTIES
window (see
).
Figure 151: The Virtual Device Properties Window
The
VIRTUAL DEVICE PROPERTIES
window lets you:
•
Add up to 128 buttons.
•
Add knobs
•
Add frames
•
Add up to 32 active configurable text labels.
•
Create up to six virtual panels (recommended).
•
Set the position and size of buttons and labels.
•
Keep track of the virtual keypad device versions by setting the version number. This helps keep track of the
version, especially when exporting a virtual device.
