Kramer Electronics Ltd.
Galil 6-AW - Installing the Galil 6-AW
5
Installing the Galil 6-AW
The
Galil
6-AW
installation steps include the following:
Choosing the Best Location
, on page
5
.
Installing the Speaker Wires
, on page
5
.
Installing the Mounting U-Brackets
, on page
7
.
Setting up an Array Installation
, on page
8
.
Connecting the Galil 6-AW
, on page
9
.
Choosing the Best Location
Before installing the speakers:
Experiment by placing the speakers in different locations before finally deciding on the
most suitable location.
Be sure that the wall type is appropriate for the mounting U-brackets, that is, either solid
wood, bricks, concrete, hollow building blocks, or wood studs.
Check that the mounting location is free of obstructions, such as electrical piping, AC
ducts or water lines, and so on.
Installing the Speaker Wires
To install the speakers:
1. Prepare the wires for the speakers:
Cut the wires to similar lengths for achieving high quality sound.
Measure the length from each speaker to the amplifier and cut the wires accordingly,
adding some excess wire length to let you easily remove the speakers from the
U-bracket without having to disconnect the input wires.
Make sure that you use weatherproof cables.
2. Strip the ends of the wires to expose a length of approximately 3/8 inch.
