Kramer Electronics Ltd.
Galil 6-AW - Installing the Galil 6-AW
7
Installing the Mounting U-Brackets
To install the mounting U-brackets:
1. Mark the location of the mounting holes on a wall at the location that you want to mount
the speakers.
2. Screw the mounting screws into the wall.
If the location is backed by wall studs, you can use the wood screws (not included). If the
location is backed by a gypsum board, use wall anchors (not included).
3. Slide a speaker into each mounting U-bracket
.
4. Align the U-bracket screw holes (upper and lower) to those on the speaker and screw a
knob
to each of the holes to secure the speaker to the U-bracket (see
Figure 4
).
Figure 4: Galil 6-AW with U-Brackets Connected
5. Slide the mounting U-bracket over the mounting screws to secure it in place.
6. You can slightly loosen the knobs on a speaker to adjust its direction.
