Kramer FC-7P, Руководство пользователя, Страница: 55 / 58

Kramer Electronics Ltd.
FC-7P
– Kramer Protocol 3000
53
TIME-LOC
Functions Permission Transparency
Set:
TIME-LOC
End User Public
Get:
TIME-LOC?
End User Public
Description Syntax
Set: Set local time offset from UTC/GMT
#TIME-LOCSP UTC_off,DayLight CR
Get: Get local time offset from UTC/GMT
#TIME-LOC?CR
Response
~nn@TIME-LOCSP UTC_off,DayLight CR LF
Parameters
UTC_off
– offset of device time from UTC/GMT (without daylight time correction)
DayLight
–
0
(no daylight saving time),
1
(daylight saving time)
Response Triggers
Notes
If the time server is configured, device time calculates by adding UTC_off to UTC time (that it got from the
time server) + 1 hour if daylight savings time is in effect
TIME command sets the device time without considering these settings
K-Config Example
Set the time offset to GMT +2, standard time:
“#TIME - LOC 2,0”,0x0D
TIME-SRV
Functions Permission Transparency
Set:
TIME-SRV
Administrator Public
Get:
TIME-SRV?
End User Public
Description Syntax
Set: Set time server
#TIME-SRVSP
mode,time_server_IP,time_server_Sync_Hour, CR
Get: Get time server
#TIME-SRV?CR
Response
~nn@TIME-SRVSP mode, time_server_IP, time_server_Sync_Hour,server_status CR LF
Parameters
mode
–
0
(OFF),
1
(ON)
time_server_IP
– time server IP address
time_server_Sync_Hour
– hour in day for time server sync
server_status
–
ON/OFF
Response Triggers
Notes
This command is needed for setting UDP timeout for the current client list
K-Config Example
Connect the device to a time server at a given IP address, activate and sync at 6AM:
“#TIME - SRV 1,xxx.xxx.xxx.xxx,06”,0x0D