Kramer FC-7P, Руководство пользователя, Страница: 48 / 58

Kramer Electronics Ltd.
FC-7P
– Kramer Protocol 3000
46
NET-DHCP
Functions Permission Transparency
Set:
NET-DHCP
Administrator Public
Get:
NET-DHCP?
End User Public
Description Syntax
Set: Set DHCP mode
#NET-DHCPSP mode CR
Get: Get DHCP mode
#NET-DHCP?CR
Response
~nn@NET-DHCPSP mode CR LF
Parameters
mode
–
0
(do not use DHCP. Use the IP address set by the factory or the
NET-IP
command),
1
(try to
use DHCP. If unavailable, use the IP address set by the factory or the
NET-IP
command)
Response Triggers
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
NAME
command. You can also get an assigned IP by direct connection to USB or RS-232 protocol port if
available
Consult your network administrator for correct settings
K-Config Example
Enable DHCP mode, if available:
“#NET - DHCP 1”,0x0D
NET-GATE
Functions Permission Transparency
Set:
NET-GATE
Administrator Public
Get:
NET-GATE?
End User Public
Description Syntax
Set: Set gateway IP
#NET-GATESP ip_address CR
Get: Get gateway IP
#NET-GATE?CR
Response
~nn@NET-GATESP ip_address CR LF
Parameters
ip_address
– gateway IP address, in the following format:
xxx.xxx.xxx.xxx
Response Triggers
Notes
A network gateway connects the device via another network, possibly over the Internet. Be careful of
security problems. Consult your network administrator for correct settings.
K-Config Example
Set the gateway IP address to 192.168.0.1:
“#NET - GATE 192.168.000.001”,0x0D