Kramer Electronics Ltd.
AFM-20DSP
– Protocol 3000
85
Function
Description
Syntax
Parameters/Attributes
Example
X-PRST-TYPES?
Get the types of
presets that the
system supports and
their hierarchy.
COMMAND
#X-PRST-TYPES?
<CR>
FEEDBACK
~nn@X-PRST-TYPES
preset_type
<CR><LF>
▪
preset_type
–
o
IOCONFIG
– used for I/O
configuration setup presets:
o
1: 4x16
o
2 6x14
o
3: 8x12
o
4: 10x10
o
5: 12x8
o
6: 14x6
o
7: 16x4
o
8: 12x8
o
IOCONFIG.SYSTEM
– used for
system preset per IOConfig, we
have 10 preset banks per
IOConfig setup, Preset #1 is the
default system preset for this
setup and is READ ONLY,
Preset #2 is used for the first
user system preset, Preset #3 for
the second etc.
o
IOCONFIG.SYSTEM.MIXER
–
used for a Mixer snapshot of a
specific system preset per
IOConfig. There are 10 MIXER
snapshots per System presets in
each IOConfig setup, Snapshot
#1 is the default MIXER
snapshot and is READ ONLY.
Snapshot #2 is used for the first
user Mixer snapshot, Snapshot
#3 for the second etc.
Get preset types:
#X-PRST-TYPES?
<CR>
X-SIGNAL-PIPE
Set a pipe between
Two outputs. This is
when we want to “tee”
a signal to another
output.
Used essentially into
AFM-20DSP
to output
audio signal to
AMPLIFIED outputs.
This is an
Extended Protocol
3000 command.
Internal
– for web only.
X-SIGNAL-
PIPE?
Get a pipe
configuration for an
output port. This is
when we want to “tee”
a signal to another
output.
Used essentially into
AFM-20DSP
to output
audio signal to
AMPLIFIED outputs.
This is an
Extended Protocol
3000 command.
Internal
– for web only.
