Kramer Electronics Ltd.
AFM-20DSP
– Processing Audio Signals
23
3. In
Output 2
, click the down arrow and select an output (for example, OUT 20).
Figure 18: DSP Page
– Selecting Right Output Amplifier Output Signal
OUT 19 outputs to the left side of the amplified speaker and OUT 20 outputs to the right side
of the amplified speaker as indicated in green on the left and the right sides of output 19 and
output 20.
Figure 19: DSP Page
– Selected Left and Right Amplifier Outputs
Linking Analog Inputs and Outputs
Users can link analog inputs and outputs in predefined pairs to balance stereo analog sources
and acceptors. When linked, signal chain modules are set for both channels simultaneously.
To link an analog audio pair:
1. In the Navigation List, click
DSP
.
In addition, you can link audio analog audio pairs via the Matrix or Mixer page.
2. Click the link on the side of the ports (IN 7 and IN 8 in this example).
Figure 20: DSP Page
– Linking Analog Audio Ports
The selected inputs are linked.
