Kramer Electronics Ltd.
AFM-20DSP
– Introduction
3
Most of the information included in this user manual is relevant to
AFM-20DSP
,
AFM-20DSP-LE
, and
AFM-20DSP-AEC
.
Sections referring to Dante, HDMI, S/PDIF, and amplifier ports (in the embedded webpages
and Protocol 3000 sections) are not relevant to
AFM-20DSP-LE
.
Unless specified otherwise,
AFM-20DSP
or “device”, when used by itself throughout this
manual, refers to all three devices.
Exceptional Quality
•
High-Performance, Professional Audio Matrix Switcher
– Professional, studio grade
signal conversion technology, including the latest generation 32-bit advanced Digital
Analog Converter architecture to achieve excellent dynamic performance and improved
tolerance to clock jitter. Maintains the quality of the original audio signal with selectable
sampling rates up to 96kHz. Flat frequency response, unmatched sonic performance,
excellent signal to noise ratio, and extraordinarily low distortion levels.
•
Multi-Channel Processing
– Provides DSP (Digital Sound Processing) that enables
simultaneous processing of all input and output signals.
•
Programmable
– Supports up to 10 global presets per I/O configuration plus 10 mixer
snapshot presets.
•
Audio de-embedding is for
AFM-20DSP
and
AFM-20DSP-AEC
only
– It de-embeds the
audio signal from the HDMI input for routing to any of the outputs or for routing to the
loop output.
Advanced and User-friendly Operation
•
Intuitive and Comprehensive Configuration and Control
– Through a powerful, user-
friendly graphic interface, set volume (gain and attenuation) and DSP for each input,
execute routing, select line in, mic in, phantom power or line out on each port, configure
master level, and more.
•
Convenient Control
– Through the user-friendly embedded webpages and RS-232 serial
controller, control signal routing, independent volume.
•
Easy, Cost-Effective Maintenance
– LED indicators for main power, line in/out, mic in,
clipping (power amp, Dante sync, and HDMI for
AFM-20DSP
only), enable easy local
maintenance and troubleshooting. Local firmware upgrade via the USB type-A port
ensures lasting, field-proven deployment.
•
Built-in Power Amplifier for
AFM-20DSP
and
AFM-20DSP-AEC
only
– 2x60W @ 8Ω and
1x120W @ 70V / 100V power amplifier.
•
Easy Installation
– 19” enclosure for rack mounting a device in a 1U rack space with
included rack ears and universal 100-240V AC power connection.
•
Firmware Upgrade
– Ethernet-based via software upgrade tool.