Kraft Werkzeuge 3906132917, Перевод с оригинального руководства пользователя

Страница: 15 / 32

15 15 GB
vice.
–
Cleaning and maintenance may not
be carried out by children.
23
Supply hoses at pressures above 7 bar
should be equipped with a safety cable
(e.g. a wire rope).
24
Avoid over-stressing the piping system
by using flexible hose connections to
prevent kinking.
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with
compressed air and blasting guns
• The compressor pump and lines can be-
come very hot during operation. Touching
these parts will burn you.
• The air which is sucked in by the com-
pressor must be kept free of impurities
that could cause fires or explosions in
the compressor pump.
• When releasing the hose coupling, hold
the hose coupling piece with your hand.
This way, you can protect yourself against
injury from the rebounding hose.
• Wear safety goggles when working with
the blow-out pistol. Foreign bodies or
blown off parts can easily cause injuries.
• Do not blow at people with the blow-out
pistol and do not clean clothes while be-
ing worn. Risk of injury!
• Only touch the compressor at the trans-
port handle (1). Other parts may become
warm during use.
• Only place the compressor on a flat
surface.
Safety information for paint spraying
• Do not process any paints or solvents with
a flash point below 55° C. There is a risk
of explosion!
• Do not heat up paints or solvents. There
is a risk of explosion!
• If hazardous liquids are processed, wear
protective filter units (face guards). Also,
adhere to the safety information provided
by the manufacturers of such liquids.
• The details and designations of the Ordi-
nance on Hazardous Substances, which
are displayed on the outer packaging of the
processed material, must be observed.
• Additional protective measures are to be
undertaken if necessary, particularly the
wearing of suitable clothing and masks.
• Do not smoke during the spraying process
and/or in the work area. There is a risk of
explosion! Paint vapors are easily com-
bustible.
• Never set up or operate the equipment in
the vicinity of a fire place, open lights or
sparking machines.
insofar as nothing different is speci-
fied in the operating manual.
–
Damaged switches must be replaced
at a customer service workshop.
–
Do not use any faulty or damaged
connection cables.
–
Do not use any electric tool on which
the switch cannot be switched on and
off.
15
Have your electric tool repaired by a
qualified electrician
–
This electric tool conforms to the
applicable safety regulations. Re-
pairs may only be performed by an
electrician using original spare parts.
Otherwise accidents can occur.
16
Important!
–
For your own safety you must only
use the accessories and additional
units listed in the operating instruc-
tions or recommended or specified by
the manufacturer. The use of mount-
ed tools or accessories other than
those recommended in the operating
instructions or catalog may place
your personal safety at risk.
17
Noise
–
Wear ear muffs when you use the
compressor.
18
Replacing the power cable
–
To prevent hazards, leave the re-
placement of damaged power ca-
bles strictly to the manufacturer or a
qualified electrician. There is a risk of
electric shock!
19
Inflating tires
–
ATTENTION! The manometer has
not been officially calibrated! Directly
after inflating tires, check the pres -
sure with a suitable pressure gauge,
for example at your filling station.
20
Roadworthy compressors for building
site operations
–
Make sure that all lines and fittings
are suitable for the maximum permis-
sible operating pressure of the com-
pressor.
21
Place of installation
–
Set up the compressor on an even
surface.
22
Attention!
–
This device can be used by children
from 8 years of age as well as by per-
sons with reduced physical, sensory
or mental capabilities or with a lack of
experience or knowledge, if they are
supervised or if they have been trained
in the safe use of the device and un-
derstand the resultant hazards.
–
Children may not play with the de -