Kozy-World KWN111 Скачать руководство пользователя страница 2

2

IMPORTANT
SAFETY  INFORMATION

Keep  the  appliance  area  clear
a n d     f r e e     f r o m     c o m b u s t i b l e
materials, gasoline, and  other
flammable  vapors  and  liquids.

WARNINGS

            

I M P O R TA N T:    R e a d     t h i s

owner’s  manual  carefully  and
c o m p l e t e l y     b e f o r e   t r y i n g     t o
assemble, operate, or  service
this  heater. Improper  use  of
this  heater  can  cause  serious
injury  or  death  from  burns,
f i r e ,     e x p l o s i o n ,     e l e c t r i c a l
shock,  and  carbon  monoxide
poisoning.

Do  not  place  clothing  or  other
flammable  material  on  or  near
the  appliance. Never  place  any
objects  on  the  heater.

Due  to  high  temperatures,   heater
s h o u l d     b e     k e p t     o u t     o f
traffic  and  away  from  furniture
and  draperies.

S u r f a c e     o f     h e a t e r     b e c o m e s
very  hot  when  running  heater.
Keep  children  and  adults  away
from  hot  surface  to  avoid  burns
or  clothing  ignition.  Heater  will
remain  hot  for  a time  after  shut
down. Allow  surface  to  cool
before  touching.

C a r e f u l l y     s u p e r v i s e     y o u n g
children  when  they  are  in  the
same  room  with  heater.

Make  sure  grill  guard  is  in
place  before  running  heater.

       

DANGER:  Carbon  monoxide

poisoning  may  lead  to  death!

Carbon   Monoxide   Poisoning.
Early  signs  of  carbon  monoxide
poisoning  resemble  the flu with
headaches, dizziness, or  nausea
If   you  have  these  signs, the  heater
may  not  be  working  properly. Get
fresh  air  at  once!
 Have  heater
serviced. Some  people  are  more
affected  by  carbon  monoxide  than
others. These  include  pregnant
women, persons  with  heart  or  lung
disease  or  anemia, those  under   the
influence of  alcohol,  and  those
at  high  altitudes.
Natural  Gas:   Natural  gas  is
odorless. An  odor-making  agent  is
added  to  natural  gas.  The  odor
helps   you  detect  a natural gas  leak  .
However,   the odor added to natural
gas can  fade.  natural   gas  may  be
present  even  though  no  odor  exists.
Make  certain  you  read  and  under-
s t a n d     a l l     w a r n i n g s .   K e e p
this  manual  for  reference. It  is  your
guide  to  safe  and  proper operation
of  this  heater.

 

         WARNING:  Do  not  use  any

accessory  not  approved  for
use  with  this  heater.

       

WARNING:  Any  change  to

this  heater  or  its  controls  can
be  dangerous.

1.   This   appliance   is  only  for  use
      with   the  type  of  gas  indicated
      on  the  rating  plate. This
      appliance  is  not  convertible  for
      use  with  other  gases.
2.   If  you  smell  gas

l

   Shut  off  gas  supply.

l

   Do  not  try  to  light  any  appliance.

l

   Do  not  touch  any  electrical  switch,

       do  not  use  any  phone  in  your
       building.

l

   Immediately  call  your  gas  sup

      plier  from a neighbor’s  phone.
       Follow the  gas supplier’s
      instructions.

l

   If  you  cannot  reach  your  gas

      supplier,  call  the  firedepartment.
3.   This  heater  shall  not  be
      installed  in  a bathroom.
4.   This  heater  needs  fresh,
      outside  air  ventilation  to run
      properly. This  heater  has  an
      Oxygen  Depletion  Sensor
      (ODS) safety  shutoff  system.
      The  ODS  shuts  down  the
      heater  if  not  enough  fresh  air
      is  available. See  

Fresh  Air  For

      Combustion  And  Ventilation

      pages  4  through  6
5.   Keep  all  air  openings  in  the
      front  and  bottom  of  heater
      clear  and  free  of  debris. This
      will  insure  enough  air  for
       proper  combustion
6.   If  heater  shuts  off. Do  not
      relight  until  you  provide  fresh,
      outside  air. If  heater keeps
      shutting  off, have  it  serviced.
7.   Do  not  run  heater

l

  

 

 where  flammable  liquids  or  va

       pors  are  used  or  stored

l

    under  dusty  conditions

8.   Turn   heater   off   before  using
      furniture   polish,   wax,     carpet
      cleaner, or  similar  products.  If
      heated, the  vapors  from  these
      products  may   create  a   white
      powder  residue   within  burner
      box   or  on   adjacent    walls  or
      furniture.

9.    Always  run  heater  with  control
       knob  at  LOW  or  HIGH  locked
       positions. Never  set  control
       knob  between  locked
       positions. Poor  combustion
       and  higher  levels  of  carbon
       monoxide  may  result.
10.   Do  not  use  heater  if  any  part
        has  been  under  water.

  Immediately  call  a  qualified
  service  technician  to  inspect
  the  room heater  and  to
  replace  any  part  of  the  control
  system  and  any  gas  control
  which  has  been  under water

11.  Turn  off   heater  and  let  cool
       before  servicing.  Only  a  qualified
       service  person  should  service
       and  repair  heater.
12.   Operating  heater  above
        elevations  of  4,500  feet  could
        cause  pilot  outage.

Содержание KWN111



















Отзывы: