
16
SPECIFICATIONS
Btu 25,000 25,000
Gas
Type
LP Gas Natural Gas
Ignition Automatic or Electronic Automatic or Electronic
Manifold Pressure 8"W.C. 3"W.C.
Inlet Gas Pressure
(In. of water)*
Maximum 14" 10.5"
Minimum 11" 5"
Dimensions, Inches (H
×
W
×
D)
Stove 38 3/16
”×
26 3/8
”×
14 1/8
”
Carton 40 1/8
”×
29 5/16
”×
15 5/16
”
Weight, lbs
Stove 78
Shipping 94
voltage 120 120
watt
27
27
*For purposes of input adjustment
GFP2516R GFN2515R
Delayed ignition burner
1. Manifold pressure is too low
2. Burner orifice clogged
1. Contact local gas company
2. Clean burner (see
Cleaning and
Maintenance,
page 13)
Burner backfiring during combustion
1. Damaged burner
2. Gas regulator defective
1. Clean burner orifice (
see Cleaning
and Maintenance
, page 13)
2. Replace gas regulator
Slight smoke or odor during initial
operation
1. Residues from manufacturing
processes
2. Not enough air
3. Gas regulator defective
1. Problem will stop after a few hours
of operation
2. Check burner for dirt and debris.
If found, clean burner (
see Cleaning
and Maintenance
, page 13)
3. Replace gas regulator
Dark residue on logs or inside of
fireplace
1. Improper log placement
2. Air holes at burner inlet blocked
3. Burner flame holes blocked
1. Properly locate logs (
see installing
logs
, page 22)
2. Clean out air holes at burner inlet.
Periodically repeat as needed.
3. Remove blockage or replace burner
Heater produces a clicking/ticking noise
just after burner is lit or shut off
1. Metal expanding while heating
or contracting while cooling
1. This is common with most heaters. If
noise is excessive, contact qualified
service person
TROUBLESHOOTING
Continued