30
#970 HEAT DUCT KIT INSTRUCTIONS
1. Remove one 6" diameter knock-out located at top of fireplace. If both heat ducts will be used, remove both knock-outs.
2. Bend 3 tabs up & out far enough to allow duct collar & duct pipe installation.
3.
For each 6” knock
-out removed in step1, remove knock-out located directly below previously removed knock-out.
4.
Slide duct collar, with circulation holes facing downward, into 6” knock
-out until it rests on top of heat shield.
1.
Slide 6” (152mm) duct pipe (s) over collar (s) until resting on top of fireplace.
2. Bend tabs up and over duct pipe. Using included screws, secure duct pipe to collar thru holes in tabs, making sure screws penetrate
thru both duct pipe and collar.
3. Position fireplace.
ATTACH DUCT PIPE TO FIREPLACE
PREPARE THE FIREPLACE
Figure 30a
Figure 30c
Figure 30b
