#CLW-50 R.4 November 2019
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FRAMING 21
3.9 Vented Cavity and KZK Installation
3.9.1 Vented Cavity Fireplace Preparation
•
All minimum required dimensions must be maintained after all
finishing materials are installed.
•
Remove the cover plates that correspond to the vented cavity
option you have chosen. See Section 3.8 Heat Distribution Cover
Plates on the previous page.
•
Remove the convection baffle from the appliance. The baffle
is secured by (2) screws right behind the upper edge of the
fireplace opening.
See Figure 3.11. Recycle this panel as it is no
longer needed.
Convection baffle
to be removed
Convection airflow
with baffle in place
Convection airflow with baffle removed
Figure 3.10, Air Flow Inside Appliance with Convection Baffle Removed
Figure 3.11, Convection Baffle Removal