#BIR-20-L R.5 June 2020
Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces
FIREPLACE SETUP
29
7.3 #BW20-500 Log Set Installation
CAUTION: Do not place logs directly over burner port holes. Improper
log placement may affect flame appearance and cause excessive soot
to build upon the logs and glass.
•
If converting to propane, complete the conversion before
installing the log set. Follow the conversion instructions included
with the kit.
•
Log numbers are located on the bottom of each log. Refer to the
following instructions and illustrations for proper log placement.
1. Align the holes in the bottom of the ember panel with the (2)
mounting pins located on left and right side of the front burner.
Push to seat.
2. Align the holes in the bottom of logs BW20-1, BW20-2, and
BW20-3 with the mounting pins on the back burner. Push logs
down onto pins to seat.
3. Position logs BW20-4 and BW20-6 with the notches in base log
BW20-1 and ember panel as shown.
4. Align log BW20-5 with the notch on log BW20-1 and the ember
panel as shown.
5. Distribute rockwool embers onto the logs and burner using a
stiff bristle brush.
Figure 7.3, Base Logs
Figure 7.4, Installed Log Set