manualshive.com logo in svg

kozy heat ABY, Инструкция по установке и эксплуатации

Поделиться
Скачать
kozy heat ABY Скачать руководство пользователя страница 13

#ABY R.2 October 2020

Hussong Mfg. Co., Inc. • Kozy Heat Fireplaces

INSTALLATION PLANNING 

13

3.5  Steel Framing Assembly Installation

WARNING: Non-combustible framing is REQUIRED above the fireplace.  

Failure to comply may cause a fire hazard. 

The steel framing assembly provides:

• 

Contact point for non-combustible material above the fireplace

1.  Locate the steel framing on top of the fireplace, as shipped. 
2.  Form the (4) vertical steel framing members as shown. These 

steel framing members are identical.

3.  Form the (3) horizontal steel framing members as shown. These 

steel framing members are identical. 

4.  Attach the vertical steel framing members to the horizontal steel 

framing members with the provided screws, as shown. 

5.  Secure the assembled parts to the fireplace with the provided 

screws. 

6.  The third steel framing member is for ceiling support. Once 

all framing requirements are completed, attach the third steel 

framing member to support the fireplace enclosure ceiling. 

7.  Secure the assembled steel framing to framing studs on 

both sides of the fireplace, once all framing requirements are 

completed.

• 

Refer to Figure 3.6, Framing Dimensions on page 15 for the 

steel framing assembly completed installation.

Figure 3.4, Stand-off Assembly and Steel Framing Installation

Содержание ABY














































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды