background image

                          KOZI 

D

IRECT 

V

ENT 

G

AS 

I

NSERT                                       

 

the logs are being cleaned, use a very soft paintbrush, as the logs are fragile and 
can be easily damaged. 

 

Always clean the glass doors when the unit is cold.  Never clean when hot.  Wipe 
glass, grill, door and appliance with a non-linting soft damp cloth. Avoid the use of 
abrasive cleansers. The plated door and grill may scratch if abrasives are used. 

 

This appliance and venting system must be inspected prior to use; and at least 
annually thereafter by a qualified technician or service agent, to ensure that the flow 
of combustion and ventilation air remains unobstructed and the venting remains 
structurally sound.  Visually inspect the flue connection. This may require pulling the 
stove out from the fireplace opening.  If the venting needs to be removed for 
cleaning, make sure to reassemble and reseal the venting according to the steps 
discussed in the Venting Installation section earlier in this manual.  During the annual 
service calls the burner should be removed and cleaned. Take extra caution not to 
block the pilot assembly. 

 

The glass doorframe and the grill have been plated with 24-carat gold.  When 
cleaning is required, use only a soft damp cloth to wipe the surfaces when the unit is 
cold.  Never attempt to clean the unit when hot. 

 

Inspect the door gasket regularly, and if it requires replacing, use ¾” fibre glass 
braided rope. (APR # DV1-605) 

Log Replacement 

 

If replacement logs are required, you must use only the proper log sets which have been 
tested and certified for use with the 

KOZI

 DV1-MI Direct Vent Gas Insert

.  For details 

on how to obtain replacement logs, contact the manufacturer or your local 

KOZI

 dealer. 

 

Glass Replacement 

 

This 

KOZI

 DV1-MI Direct Vent Gas Insert

 has been tested and certified with high-

temperature ceramic glass panels for your protection.  This ceramic glass has been 
engineered to withstand the highest temperatures your appliance will produce.  If 
however, this glass is shattered or cracked due to impact or collision, do not use the 
insert.  The complete window and frame assembly must be replaced with a new or 
rebuilt assembly as supplied by the manufacturer or dealer.  Only doors certified with the 
appliance by the manufacturer can be used.  Broken or damaged glazing should be 
removed with care (using gloves) to avoid injury. 
 
Replacement parts should only be obtained directly from authorized 

KOZI

 dealers or the 

manufacturer.  Substitutes are 

NOT

 permitted.  Substituting materials for repair or 

replacement other then as suggested or supplied by the dealer or manufacturer could 
cause a safety hazard.   
 
The ceramic glass window is very strong but should not be abused by striking it, 
slamming it or any inappropriate actions. 
 
 

 

 

15 

Содержание DV1-M1






















Отзывы: