KOZI
D
IRECT
V
ENT
G
AS
I
NSERT
adjustment of the regulator is required. Please contact a factory technician
immediately.
6. Referring to the section on installing the log set, place the logs in their proper
locations on the burner.
7. Clean the gold door and all gold trim with a non-abrasive cream cleaner. If you
do not remove all smudge marks or fingerprints from the gold plating prior to your
first fire, it will become permanently tarnished.
Important:
The paint used throughout this unit is not completely cured until it has been fired.
To aid in this process, fire the unit on high. Keep the room well ventilated to
discharge odors. You may have to repeat this process several times.
Log Installation
1. Turn the burner switch to OFF. Turn
the gas valve OFF. Allow the unit time
to cool.
2. Remove the side panels of the
stove by pulling them away from
the unit wall. These panels are
held in place by two magnets on
each side.
3. Loosen the door mount bolts from
both sides of the door. Remove
the glass door assembly.
4. Place the logset on top of the
burner so that the bottom corner of
the logset rests against the corner
bend of the burner, as shown in
Figure 5.
Figure: 5 – Side view of burner and log placement.
5. Center the logset to the burner, as shown in Figure 6.
6.
Dangerous operating conditions may result if the logs are not positioned properly.
If the logs appear broken or damaged, DO NOT use this appliance until they have
been replaced.
10
