Koukaam NETIO-230B, Инструкция по эксплуатации

Страница: 8 / 22

browser or by double clicking on the device name in the NETIO discover utility.
5. The login page appears. Input the User Name , Password into the login page and click OK . You
jump to the device web.
Default user name is admin , password admin
Figure 5: login page
For login to web interface, JavaScript support must run on the browser.
5 Operation and Settings
5.1 Output control and settings
5.1.1 Output control
Click on Manual Control the Menu on the left side. Output Manual control page will show up.(figure 6)
NETIO-230B can control all four outputs at the same time. Choose which ports should be turned
ON/OFF and click Apply . If you would like only to restart the devices connected to the specific ports,
tick Interrupt and then click Apply . Selected ports will interrupt for the time specified in the Status &
configuration page and then will turn on again.
Please note that you can interrupt for a short time only ports, which are turned ON. If you would
like to turn ON/OFF manually or restart, make sure that the corresponding Manual checkbox is ticked. If
7