Koukaam NETIO-230B, Инструкция по эксплуатации

Страница: 17 / 22

3. The device should give you the reply like: 100 HELLO EB5D61F6 The last 8 characters constitute
the hash code needed for secure login with encrypted password.
4. You can login now by entering command login name password, where name is the user name and
password is your password . If you entered correct name and password the device should reply
250 OK. Now you are logged in and you can use commands to control your NETIO-230B.
Each communication session via KSHELL interface has limited validity. In case of no response for
about one minute, the session is terminated automatically. If you need to keep the session active, you
can use the command
noop .
5.3.3 List of commands for control via KSHELL
login < name >< password > User login with open password.
Example: Using login admin admin , you will login with username admin and password admin.
clogin
<
name
><
crypted password
>
User login with encrypted password.
version Shows firmware version.
alias
Shows device name.
quit Logout. If system changes have been made, device restart is done.
reboot
Logs out, closes the current session and restarts the device.
noop Function that maintains the connection, does not execute any operation. Suitable for use during
machine control of the device.
uptime Shows the device uptime.
port < output > [0/1/manual/int] Status and port setup:
• If you enter only output number, output status shows (0 - OFF / 1 - ON)
•
Output number and 0/1 parameter - disables / enables output
•
Output number and ’manual’ parameter - enables manual output control
•
Output number and ’ int ’ parameter - interrupts output
Example: Command port 2 1 will turn ON output 2.
port list [xxxx] :
• Without any parameters it lists current status of all outputs
• xxxx command for simultaneous control of all ports - replace x with the commands:
• 0 - to turn the output OFF
• 1 - to turn the output ON
•
i - to interrupt the output
•
u - to leave the output without any change of its status
16