KOS Box Atollo freestanding, Инструкция по сборке

Страница: 8 / 76

8
GB
The ATOLLO shower booth, realized in co-extruded methacrylate, was designed to be installed in a right-hand or left-hand corner. Careful at-
tention must be given during installation in order to assemble the booth in the appropriate way to guarantee easy inspection in case future
maintenance becomes necessary.
The available version of
ATOLLO
are:
BASE: fixed hydromassage jets
Back jets
foot test
seat
manual shower
shower head
optional : radio, IDROCOLORE
®
EASY: sequential hydromassage jets
Back jets
foot test
seat
manual shower
shower head
Turkish bath
optional : radio, IDROCOLORE
®
TOP: sequential hydromassage jets
Back jets
foot test
seat
manual shower
shower head
Turkish bath
radio
TOUCH SCREEN keypad
®
optional : IDROCOLORE
®
The elements that comprise ATOLLO are:
A - A tray complete with drain tube.
B - A front right panel equipped with shower and rod, and vertical jets.
C - A side panel with 5 lumbar hydromassage jets, the essences dispenser for the Turkish bath and a wide seat in white polyurethane.
D - A corner closure with glass.
E - A wide hinged door in tempered glass that ensures, in compliance with all safety standards, a perfect seal against water and steam.
F - A top equipped with a shower vent of a large size for a relaxing shower which can also be used by taller people and the IDROCOLOR® function, which
thanks to an innovative spotlight, illuminates in complete safety the inside of the booth with a magic coloured light.
G - Filler panel
H - Front inspection panel
L - Upper top
M - Seat
The connection of the box to the water mains must be made using the hoses covered in steel mesh in accordance with standard IEC 61770, included.
Min. pressure 150 KPa
Max. pressure 500 KPa
The installer, following the instructions in the technical diagram, must provide for suitable connections for hot/cold water, for electrical connection, and
for the floor drain. (D = 40).
N.B.: the ATOLLO shower booth was designed to be installed in a right-hand or left-hand corner.
Hereunder you will find the instructions for installation of the version “S” (wall center) with appropriate additions for the “D” version (right) versions.
Attention! It takes 2 persons for
installation.
Attention! Dispose of packaging in
accordance with current standards
in the country of installation.