KORR MetaCheck 7100, Руководство пользователя, Страница: 27 / 48

21
6.4 Print Last Test
The print last test screen is shown if the last test was never successfully printed.
Press the [Print] soft key to get to the results screen and print the previous test,
press the [Skip] soft key to continue on with the warm up sequence.
The last test was
never printed.
[Skip] [Print]
Figure 6.13 Print Last Test Screen
6.5 Turning off the MetaCheck™
When the user turns off MetaCheck™ at the completion of a test, the display
screen will go dark, but will read “unit drying.” A fan will run for 10 minutes to dry
out the components inside the MetaCheck™. After 10 minutes, the unit will
automatically turn off.
6.6 Starting Another Test
To perform another test in rapid succession, press the Menu key, and select the
“Start New Test” option. The MetaCheck™ will immediately begin calibration to
prepare for a new test. Be sure to remove and dispose of the mouthpiece and
hose.