Korg X5DR AI2 SYNTHESIS MODULE, Руководство пользователя

Страница: 90 / 183

Reference Guide
77
Reference Guide
Program
Parameters
1
Reference Guide
Reference Guide
Parameter Guide
About this chapter
The following chart shows how the explanations in this chapter are organized.
MIDI Data Values
In general, decimal values are used throughout this Owner’s Manual . Numbers that are enclosed
by square brackets are hexadecimal.
• The words “keyboard” and “joystick” used in this parameter guide refer to the keyboard and
joystick on a synthesizer (such as the X3) connected to the MIDI IN terminal of the X5DR.
You can send various MIDI messages to the X5DR using the keyboard and joystick. You can
also obtain the same result by sending MIDI messages from a computer connected to the MIDI
IN or TO HOST of the X5DR.
0A–0B Global Oscillator Setup
These parameters are used to set the type of Program.
LCD Parameter Range Description
00A
Oscillator Mode
(OSC Mode)
SINGLE
DOUBLE
DRUMS Oscillator 1
Oscillator1 and Oscillator2
A drum kit
00B
Assign (ASN)
POLY
MONO Polyphonic
Monophonic
Hold (HLD) ON/OFF Note hold after key release (set to ON for DRUMS mode)
00A OSC Mode ø
DOUBLE
0A 0B
00B OSC1
ASN:POLY HLD:OFF
ø
Related LCD screen group
Section title
Section summary LCD screens in the group
Press the [
√
], [
®
] cursor
buttons to move to the
previous and next
screens, respectively.
LCD screen or function
button numbers. Parameters on each
LCD screen
The characters in
parentheses( ) are
shown on the screen.
Brief description. A full
description is provided
in the text below each
parameter table. Parameter range or
available settings
The left-most value or
the value on the upper
line is obtained when
you press and hold
down the [
▼
] button.