Korg X5DR AI2 SYNTHESIS MODULE, Руководство пользователя

Страница: 14 / 183

Start-up Guide
1
Using a
Keyboard
Start-up Guide
Start-up Guide
Using a Keyboard
Connections
DC IN 12V
700mA
TO HOST THRU OUT
MIDI
IN
R L/MONO
OUTPUT
To the power outlet
DC IN
AC Adapter
Powered monitor
(such as the PM-15)
R
L/MONO
MIDI OUT
MIDI cable
MIDI keyboard
Volume pedal Damper pedal
Connecting to a power source
1
Connect the AC adapter plug
to the DC IN connector on the
rear panel. Then, plug the AC
adapter into an AC outlet.
VOLUME
10 0
PHONES
MIDI
EDI
COM
Headphones
PHONES
Connecting a monitor
2
Connect the OUTPUT jacks to
a powered monitor or stereo
amplifier.
* Use the L/MONO jack for
monaural connection.
Connecting a MIDI keyboard
3
Connect the MIDI OUT jack of the MIDI
keyboard to the MIDI IN jack of the X5DR
using a MIDI cable.
* Refer to “MIDI keyboard settings” (page 2).
Powered monitor/stereo amplifier
In order to playback the X5DR's high-fidelity sound, we recommend that you connect the X5DR to
powered monitors (i.e., speakers with built-in amplifiers, such as the optional PM-15). If you are going
to connect a stereo amplifier or other device (such as a stereo radio or a cassette tape recorder), use
the connector labeled “LINE IN” or “AUX IN” on those devices.
!
Secure the AC adapter
cable by hooking it as
shown in the illustration to
prevent the adapter plug
from being accidentally
removed.
To use the headphones, plug the
headphone cable into the PHONES jack
on the front panel.
If you connect the X5DR to a domestic hi-fi system, be careful not to raise the volume level too
high, or you may damage the speakers.
Using a
Keyboard
Start-up Guide