manualshive.com logo in svg

Korg Karma, Основное руководство

Поделиться
Скачать
Korg Karma Скачать руководство пользователя страница 101

95

Basic functions

Disk mode

Saving data

For the procedure of saving data to a floppy disk, refer 
to “Saving on floppy disks” (

☞

p.40).

Types of data that can be saved

The following types of data can be saved on external 
media (floppy disk).

• .PCG files

Programs, combinations, global settings, drum kits  
(the data specified by the “S.Item” (Select Save 
Items) check boxes when saving will be saved).

• .SNG files

Songs, cue lists, and pattern

• Standard MIDI files (SMF)

Sequencer mode songs can be saved as SMF data.

• System exclusive data

System exclusive data received by this instrument 
from an external MIDI device (this instrument can 
be used as a data filer).

For details on each type of file and the icon associ-
ated with it, refer to the lower diagram on page 
p.93.

Formatting a disk

Floppy disks must be formatted.
A disk that is not in MS-DOS format cannot be used as 
is. Such a disk must be formatted before it can be used 
with this instrument.
For the formatting procedure, refer to “Format” (

☞

PG 

p.156).

Cautions when handling floppy 
disks

When handling floppy disks, please observe the fol-
lowing points. Data loss may occur if a floppy disk is 
handled improperly.

Floppy disk type and format

This instrument can use 2HD or 2DD 3.5 inch floppy 
disks.

Floppy disk handling

• Do not open the shutter of a floppy disk or touch 

the magnetic surface inside the disk. If the 
magnetic disk becomes soiled or scratched, it will 
no longer be possible to read data format.

• Never transport this instrument with a floppy disk 

in the disk drive. Vibration may cause the disk 
drive heads to scratch the floppy disk, making it 
unusable.

• Do not allow a floppy disk to be placed near a 

device that emits a magnetic field, such as a 
television, computer, computer display, speaker, or 
power supply transformer. This can erase data on 
the disk.

• Do not use or store floppy disks in locations of 

excessive temperature or humidity, in direct 
sunlight, or in dusty or dirty locations.

• Do not place objects on top of a floppy disk.
• While the disk drive is operating, do not attempt to 

remove the floppy disk, and do not subject this 
instrument to physical shock.

Floppy disk write protect

Floppy disks have a small write protect hole that can be 
used to prevent data from being erased or rewritten 
accidentally.
After saving data to disk, move the write protect tab so 
that the hole is uncovered. This will prohibit writing to 
the disk, and will prevent the data from being 
destroyed accidentally.

Write permit: Move the tab 
so that the write protect hole 
is covered.

Write prohibit: Move the tab 
so that the write protect hole 
is open.

Содержание Karma























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды