AIR-SEP
Pressure Maintenance with AIR-SEP
SmartControl
4
KOREX Benelux B.V.
1.
General and Information
In this user manual, the installation and the operation of the KOREX AIR-SEP
®
pressure maintenance stations are described.
It describes the equipment in its basic configuration with the necessary accessories and with optional accessories. Information
about the optional accessories can be found in
Accessories (optional) | Chapter 2.5
.
KOREX shall accept no liability whatsoever for claims arising from the non-observance of this user manual. The national
legislation and regulations of the respective country of installation must be complied with (accident prevention, environmental
protection, safe and professional working, etc.)
1.1
Liability and Warranty
The equipment is constructed in accordance with the state-of-the-art technology and the recognized safety-related regulations.
Nevertheless, when using the equipment risks to the life and limb of the personnel and / or third parties as well as damage to
the equipment or to other material assets can occur. There must be no alterations made to the equipment.
The liability of the manufacturer shall be excluded when these can be traced back to one or more causes:
▪
Use not in accordance with the intended purpose of the equipment.
▪
Incorrect and / or improper commissioning, operation, maintenance, servicing, repair and installation of the
equipment.
▪
Non-observance of the safety instructions in this user manual.
▪
Operation of the equipment with defective or incorrectly fitted safety devices / protective equipment.
▪
The late carrying out of scheduled maintenance and inspection work.
▪
The use of non-approved spare and accessory parts.
1.2
Symbols Used
WARNING! DANGER! CAUTION! ATTENTION!
The non-observance of these safety instructions can lead to personal injury and / or material damage!
WARNING!
The non-observance of these safety instructions can lead to electric shock which can result in serious
personal injury or death.
WARNING!
The surfaces of the product can become so hot that contact with them can lead to personal injury in the form
of burns.
1.3
Intended Purpose
The AIR-SEP
®
unit is a pressure maintenance station for heating, cooling and refrigeration systems. It serves the purpose of
maintaining water pressure, the resupplying with water and the degassing of the water in a system. Operation must only take
place in corrosion-resistant closed systems with the following waters:
▪
Not corrosive
▪
Not chemically aggressive
▪
Not toxic
The ingress of atmospheric oxygen through permeation into the entire heating and cooling system, top-up water, etc. during
operation must be reliably minimized.
