21
DHCP Client Enable or Disable DHCP Client function. When DHCP Client
function is enabled, an IP address will be assigned to the switch
from a network’s DHCP server. In this mode, the default IP
address will be replaced by the one assigned by the DHCP server.
If DHCP Client is disabled, then the IP address that you specified
will be used instead.
IP Address
Assign an IP address for the device. If DHCP Client function is
enabled, you don’t need to assign an IP address, as it will be
overwritten by the DHCP server. The default IP address is
192.168.10.1.
Subnet Mask Assign the subnet mask for the IP address. If DHCP Client
function is enabled, you don’t need to assign the subnet mask.
The default Subnet Mask is 255.255.255.0.
Note: In the CLI, we use the enabled subnet mask to represent
the number displayed in the web UI. For example, 8 stands for
255.0.0.0; 16 stands for 255.255.0.0; 24 stands for
255.255.255.0.
Gateway
Assign the gateway for the switch. The default gateway is
192.168.10.254.
Note: In the CLI, we use 0.0.0.0/0 to represent the default
gateway.
Once you finish configuring the settings, click the Apply button to apply your
configuration.
3.2.4.
Time Setting
Time Setting source allow user to set the time by manually or through NTP server.
It also provide time synchronize from PC. Network Time Protocol (NTP) is used to
synchronize computer clocks on the internet. You can configure NTP settings
