IP67 / IP68 Industrial Ethernet Switch
16
www.korenix.com
(VLAN) Interface Configuration: Type interface VLAN VLAN-ID in global
configuration mode. You can then enter the VLAN interface configuration mode.
In this mode, you can configure the settings for a specific VLAN.
The VLAN interface name for VLAN 1 is VLAN 1; VLAN 2 is VLAN 2.
You can type exit to leave or “? “ for a list of available commands.
Available commands for the VLAN interface configuration mode appear below.
The following is a summary of command modes.
Command
Mode
Main Function
Enter and Exit Method
Prompt
User EXEC
This is the first level of
access.
Users can ping, telnet
remote device, and show
basic information
Enter: Type login to login
Exit: Type exit to logout
Next mode: Type enable to
enter privileged EXEC mode.
Switch>
Switch(config)# interface fa2
Switch(config-if)#
auto-negotiation
Enables auto-negotiation state of a given port
description
Interface specific description
duplex
Specifies the duplex mode of operation for a port
end
End current mode and change to enable mode
exit
Exit current mode and down to previous mode
flowcontrol
Sets the flow-control value for an interface
list
Print command list
loopback Specifies the loopback mode of operation for a port
mac
MAC interface commands
mdix
Enables mdix state of a given port
no
Negate a command or set its defaults
poe
Configure power over ethernet
qos
Quality of Service (QoS)
quit
Exit current mode and down to previous mode
rate-limit Rate limit configuration
shutdown Shutdown the selected interface
spanning-tree the spanning-tree protocol
speed
Specifies the speed of a Fast Ethernet port.
switchport Set switching mode characteristics
Switch(config)# interface vlan 1
switch(config-if)#
Description
Interface specific description
end
End current mode and change to enable mode
exit
Exit current mode and down to previous mode
ip
Interface Internet Protocol config commands
list
Print command list
no
Negate a command or set its defaults
quit
Exit current mode and down to previous mode
shutdown
Shutdown the selected interface
