15
Global Configuration mode: Type configure terminal in privileged EXEC mode.
You can then enter the global configuration mode. In global configuration mode,
you can configure all the features that the system provides.
Type interface IFNAME/VLAN to enter interface configuration mode and exit to
leave, or ? for command list.
(Port) Interface Configuration: Type interface IFNAME in global configuration
mode. You can then enter interface configuration mode. In this mode, you can
configure port settings.
The port interface name for fast Ethernet port 1 is fa1; fast Ethernet 6 is fa6. You
can type the interface name accordingly when you want to enter a specific
interface configuration mode.
You can type exit to leave or “?” for a list of available commands.
Below are the available commands for port interface configuration mode.
Switch(config)# ?
access-list Add an access list entry
administrator Administrator account setting
arp
Set a static ARP entry
clock
Configure time-of-day clock
default
Set a command to its defaults
end
End current mode and change to enable mode
exit
Exit current mode and down to previous mode
hostname
Set system's network name
interface Select an interface to configure
ip
IP information
list
Print command list
log Logging
control
mac
Global MAC configuration subcommands
mac-address-table mac address table
no
Negate a command or set its defaults
ntp Configure
NTP
password
Assign the terminal connection password
qos
Quality of Service (QoS)
relay
relay output type information
rmon Remote
monitoring
router
Enable a routing process
smtp-server
SMTP server configuration
snmp-server
the SNMP server
spanning-tree the spanning tree algorithm
super-ring
the super-ring protocol
warning-event Warning event selection
write-config Specify config files to write to
Switch(config)#
