19
3.2.1.
Switch Setting
You can assign a System name, Location, Contact and view the system
information. The following figure is the Web UI for Switch Setting.
System Name
Assign a name to the device. You can input up to 64
characters. After you configure the name, the CLIP system
will select the first 12 characters as the name for the CLIP
system.
System Location
Specify the switch’s physical location. You can input up to
64 characters.
System Contact
Specify contact people. Enter the name, e-mail address or
other information about the administrator. You can input
up to 64 characters.
System OID
Set the SNMP object ID of the switch. You can follow the
path to find its private MIB in the MIB browser. Note: When
you attempt to view a private MIB, you should compile
private MIB files into your MIB browser first.
System Description View a description of the system.
Firmware Version
Display the firmware version installed on this device.
Device MAC
Display the unique hardware address (MAC address)
