11
4 Feature Configuration
This chapter explains how to configure JetNet 5008G-P software features. There are 3
ways to access the switch: Telnet, Web browser, and SNMP.
JetNet 5008G-P series Industrial Managed Switch provides in-band configuration methods.
The in-band management means you can remotely manage the switch via the network.
You can choose Telnet or Web-based or SNMP management. You just need to know the
device’s IP address. Then you can remotely connect to its embedded HTML web pages or
Telnet console.
Korenix web management page is developed by JAVA. It allows you to use a standard
web-browser such as Microsoft Internet Explorer, or Mozila, to configure and interrogate
the switch from anywhere on the network.
Note
: IE 5.0 or later versions do not allow Java applets to open sockets by default. Users
have to directly modify the browser settings to selectively enable Java applets to use
network ports.
Following topics are covered in this chapter:
4.1 Command Line Interface (CLI) Introduction
4.2 Basic Setting
4.3 Port Configuration
4.4 Network Redundancy
4.5 VLAN
4.6 Traffic Prioritization
4.7 Multicast Filtering
4.8 SNMP
4.9 Security
4.10 Warning
4.11 Monitor and Diag
4.12 Save
4.13 Logout
