8
3.
The popup screen will appear and request you to trust the secured HTTPS
connection distributed by JetNet 5008G-P first. Press
Yes
to trust it.
4.
The login screen will appear next.
5.
Key in the user name and the password. The default user name and password is
admin
.
6. Click
on
Enter
or
OK.
Welcome page of the web-based management interface will
then appear.
7.
Once you enter the web-based management interface, all the commands you see
are the same as what you see by HTTP login.
3.2 Preparation for Telnet Console
3.2.1 Telnet
Korenix JetNet 5008G-P supports Telnet console. You can connect to the switch by
Telnet and the command lines are the same as what you see by RS232 console port.
Below are the steps to open Telnet connection to the switch.
1. Go to Start -> Run -> cmd. And then press
Enter
2. Type
the
Telnet 192.168.10.1
(or the IP address of the switch). And then press
Enter
