3
5
16
16
20
20
2
1
14
14
15
15
14
14
Plug-in
Car body
hole
c
d
28
d
with rubber sleeve and
metal
washer
(part 22) into the rear axle in sequence, and clamp the assembled
Insert the rear wheel cartridge (part 28) into the rear axle, and then assemble the driv
7)
part into the groove of the rear axle with the retaining spring (part 23), and finally fasten the
wheel cover (part 8).
1
1
2
3
(Optional C, Optional D) Installation of Rear Wheel
2. Installation of J-shaped stick
(Optional B, Optional D)
(Optional A, Optional C)
Insert the J-shaped iron hook (part 14) into the
designated position in front of the car.
Insert the J-shaped
metal
hook (part 14) into
the front gearbox, and then tighten it by using
the steering gearbox screw (part 15).
Plug the wire
from
the steering wheel into the wire
plug from the car body hole correspondingly, and
then put the connected plugs into the car body hole.
3. Installation of steering wheel and hand shank
Install the steering wheel (part 3) on the J-shaped
metal
hook, and tighten with the steering wheel
screw (part 16) and the steering wheel
lock
nut
(part 20); then insert the handle (part 5) into the
designated position and press down firmly to make
it reliably connected.
3. Normal operation:
1) Foot switch mode
A. Press the main power switch button
C. Select forward/reverse direction
B.
Press the pedal low speed or high speed button
D.
Step on the pedal
to start the car
2)
(Optional A, Optional B) Remote control
pairing
operation
A.
Press the main power switch button to turn it on (
pairing
will be valid within two minutes after powering on)
B.
Simultaneously keep pressing the speed change button and sudden brake button of the remote control for
5 seconds; if the lamp of first gear, second gear and third gear twinkles, it will indicate that the
code-matching action is transmitted; it will indicate that the codes are matched successfully until the lamp
is on and stops twinkling; when the
pairing
action is received, the front wheel will rotate leftwards
for 1s
and rightwards for 1s.
3)
(Optional B, Optional D) Remote control function
A.
Forward/backward button B. Left/right movement button
C. Sudden brake button D. Speed change button
E. It will enter the sleep state if no operation occurs within 1 min. You can press any button to reawaken it.
(Optional A, Optional B)
(Optional C, Optional D)
Central
control board
Central
control board
Forward/backward
gear handle
(middle position for stop)
Footswitch
Forward/backward
gear handle
(middle position for stop)
Footswitch
Steering
Wheel
Previous music
volume (-)
Horn button
Next music
volume (+)
Seat
belt
Open
Open
Buckle up
Buckle up
