KONTRONIK Smile 30-6-12, Руководство по эксплуатации

Страница: 38 / 40

Errors in use
·
Unexpected motor cut off:
-
Strong interference of the receiving Tx pulses.
Correction : Install the Rx and the antenna with more distance
from speed control and motor.
-
Over temperature.
Correction : Improve the cooling of the speed control.
-
Interruption of the voltage supply (loose connection).
Correction : Only use high quality connectors, e.g. KONTRONIK
connectors.
· Motor can not be started:
The speed control only unlocks the motor after connection of the
battery when recognising the throttle position EMF-brake and/or
motor-off position. If the speed control do not recognise these
positions no
is produced and the motor remains off.
Correction :
-
Consider the position of the trim of the throttle control and
adjust to motor-off and/or brake position.
- Program the speed control to the current throttle positions.
- Some RCs show thermal drift. In this case, it’s recommended
to keep some distance to the end of the throttle control
positions while programming, in order to have some reserve
available in use. This allows a troublefree attaining of the
positions motor-off and/or brake.