manualshive.com logo in svg

Kontron V Panel Express 121, Руководство пользователя

Поделиться
Скачать
Kontron V Panel Express 121 Скачать руководство пользователя страница 38

 

 

10. Starting Up  

V Panel Express – User’s Guide (V1.01) 

 

10.2.

 

Operating System and Hardware Component Drivers 

Your V Panel Express system can be supplied either with or without a pre-installed operating system.  

If you have ordered your system with a pre-installed operating system, all drivers are installed in accordance with the 
system configuration ordered (optional hardware components). Your system is fully operational at the first start-up. 

If you have ordered a V Panel Express system without a pre-installed operating system, because you want to install it 
yourself, please pay attention to the following instructions: 

 

You can download the relevant drivers for the installed hardware from our web site at 

www.kontron.com

 

by selecting the product name (designation). 

The corresponding driver (depending on the installed operating system) for the touch screen controller 
is available on our web site by selecting the “Downloads” tab of the V Panel Express product site. 

 

10.2.1.

 

Hints for the Installation of the ELO Touch Screen Controller Driver 

The display unit is equipped with a resistive touch screen. The touch screen is internally connected to the on-board USB 
interface of the installed ETX baseboard. 

10.2.1.1.

 

Preparations of System for Installation Procedure 

Before installing the driver please check the following items. 

❏

 

operating system installed 

❏

 

USB port driver for operating system installed. 

❏

 

USB port in BIOS enabled 

 

10.2.1.2.

 

Install Touch Controller Software 

Please download corresponding touch controller software form Kontron web site 

http://www.kontron.com/

. 

 

 

 

Fig. 34: Accept License Agreement 

Fig. 35: Installing the touch files 

36

 

www.kontron.com

 

StockCheck.com

Содержание V Panel Express 121


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды