7. Product Description
V Panel Express –User’s Guide (V1.01)
7.2.6.
Interfaces
7.2.6.1.
USB 2.0 Connectors
The system is equipped at the front side with 4x USB 2.0 interface connectors (Fig. 8, pos. 1). These connectors provide
connections for USB-compatible devices.
7.2.6.2.
DVI-I Interface Connector
The DVI-I interface (Single Link) (Fig. 8, pos. 19) supports both digital and analog connections. Digital devices can be
connected directly to this interface of the V Panel Express. Analog devices should be connected to this interface via a DVI
to VGA adapter (not included).
7.2.6.3.
Serial Interface Connectors (COM1, COM2, COM3 and COM4)
These serial interfaces (Fig. 8, pos. 7 and 21) (RS232 connections) are available as 9-pin D-SUB plugs and provide
connection for serial devices. For the optional COM 4 port (Fig. 8, pos. 21) can be ordered a configuration as RS 232,
RS422 or RS485 (isolated or non isolated).
The serial interface marked “COM4” (Fig. 8, pos. 21) is an option and can be ordered as RS232, RS422 or
RS485 interfaces (isolated or non isolated). Only factory configuration is possible.
7.2.6.4.
Ethernet Interface Connectors
These interface connectors (Fig. 8, pos. 2 and 3) are provided as RJ45 sockets with integrated LEDs. The data transfer rate
depends on the installed ETXexpress module (see below):
Data Transfer Rate for System Configuration with:
Ethernet Port
ETXexpress-CD Module
ETXexpress-PM Module
ETXexpress-PC Module
LAN1
10/100 Mbps
10/100/1000 Mbps 10/100/1000
Mbps
LAN2
10/100/1000 Mbps
10/100/1000 Mbps 10/100/1000
Mbps
LAN LED States:
Left LED State
Link Speed
Right LED State Link Activity State
off
10 Base-T
Off
Link not active
green
100 Base-T
Green
Link active
yellow 1000
Base-T
www.kontron.com
19
StockCheck.com
