Kontron SMARC-sAMX7, Руководство пользователя

Страница: 32 / 50

SMARC-sAMX7 User Guide. Rev. 1.9
www.kontron.com // 32
Pin
Signal
Module
Direction
Module
Termi-
nation
Type/
Tolerance
Controller
Controller Pin
Name
Port(i.MX7 dual) Port (i.MX7 Solo) Power Rail
S132
LVDS0_2-
/eDP0_TX2-
/DSI0_D2-
Out - LVDS LCD SN65DSI84 B_Y2N MIPI DSI MIPI DSI -
S133 LCD0_VDD_EN Out - CMOS 1.8V iMX7 LCD_DATA14 GPIO3_IO20 GPIO3_IO20 NVCC_LCD (1.8V)
S134
L/eDP0
_AUX+/DSI0_CLK
+
Out - LVDS LCD SN65DSI84 B_CLKP MIPI DSI MIPI DSI -
S135
LVDS0_CK-
/eDP0_AUX-
DSI0_CLK-
Out - LVDS LCD SN65DSI84 B_CLKN MIPI DSI MIPI DSI -
S136 GND - - - - - - - GND
S137
/eDP0_
TX3+/
Out - LVDS LCD SN65DSI84 B_Y3P MIPI DSI MIPI DSI
S138
LVDS0_3-
/eDP0_TX3-
/DSI0_D3-
Out - LVDS LCD SN65DSI84 B_Y3N MIPI DSI MIPI DSI -
S139 I2C_LCD_CK Out PU-2k21 CMOS 1.8V iMX7 UART1_RXD I2C1_SCL I2C1_SCL NVCC_I2C (1.8V)
S140 I2C_LCD_DAT Bi-Dir PU-2k21 CMOS 1.8V iMX7 UART1_TXD I2C1_SDA I2C1_SDA NVCC_I2C (1.8V)
S141 LCD0_BKLT_PWM Out - CMOS 1.8V iMX7 GPIO1_IO09 PWM2_OUT PWM2_OUT
NVCC_GPIO2
(1.8V)
S142 RSVD - - - - - - - -
S143 GND - - - - - - - GND
S144 EDP0_HPD - - CMOS 1.8V - - - - -
S145 WDT_TIME_OUT# Out - CMOS 1.8V iMX7
ENET1_RX_CL
K WDOG2#/GPIO7_I
O13 WDOG2#/GPIO7
_IO13 NVCC_ENET1
(1.8V)
S146 PCIE_WAKE # In PU-4k75 CMOS 3.3V iMX7 SAI1_TXFS GPIO6_IO14 GPIO6_IO14 NVCC_SAI (1.8V)
S147 VDD_RTC -
Ser-1k +
Diode
PWR iMX7 VDD_SNVS_IN VDD_SNVS_IN VDD_SNVS_IN
VDD_SNVS_IN
(3V)
S148 LID# In PU-4k75 CMOS 1.8V iMX7 LCD_DATA8 GPIO3_IO13 GPIO3_IO13 NVCC_LCD (1.8V)
S149 SLEEP# In PU-4k75
CMOS
VDDIN
iMX7 LCD_DATA9 GPIO3_IO14 GPIO3_IO14 NVCC_LCD (1.8V)
S150 VIN_PWR_BAD# In W-PU CMOS 1.8V POWER - - - -
S151 CHARGING# In PU-4k75 CMOS 1.8V iMX7 SD2_CLK GPIO5_IO12 GPIO5_IO12 NVCC_SD2 (1.8V)
S152
CHARGER_PRSNT
#
In PU-4k75 CMOS 1.8V iMX7 SD2_WP GPIO5_IO10 GPIO5_IO10 NVCC_SD2 (1.8V)
S153 CARRIER_STBY# Out - CMOS 1.8V iMX7
PMIC_STBY_R
EQ
PMIC_STBY_REQ PMIC_STBY_REQ
NVCC_SNVS_IN
(3V)
S154
CARRIER_PWR_O
N
Out PD-2k21 CMOS 1.8V POWER - - - -
S155 FORCE_RECOV# In PU-4k75 CMOS 1.8V iMX7 BOOT_MODE0 BOOT_MODE0 BOOT_MODE0
NVCC_GPIO1
(3.3V)
S156 BATLOW# In PU_2k21 CMOS 1.8V iMX7 LCD_RESET GPIO3_IO04 GPIO3_IO04 NVCC_LCD (1.8V)
S157 TEST# In
PU-10k +
FET
CMOS 1.8V
PI7C9X2G40
4SL
JTAG_MOD - - -
S158 GND - - - - - - - GND