SMARC-sAMX7 User Guide. Rev. 1.9
// 16
Operating System
Support
Linux Yocto, other Operating Systems only on customer request
Interfaces via Smarc I/O
I2C
4x I2C interfaces which are derived from the SoC, the iMX7 I2C IOs PADs are configured
according the NXP AN5078,
I2C_PM Power Management Support
I2C_GP General Purpose Use
I2C_CAM0 camera support
I2C_LCD Display support
LAN, USB
1x Gb-Ethernet Solo processor, 2x Gb interface with Dual processor,
Solo processor: 1x USB OTG and 4x USB2.0 with High-Speed Inter-Chip (HSIC) hub
Dual processor: 2x USB OTG and 4x USB2.0 with HSIC hub
PCIe
solo processor: no PCIe
dual processor: 3x PCIe via PCIe switch, option for 1x PCIe without PCIe switch
Audio
2x Synchronous Audio Interface (SAI)
Display
2x LVDS interfaces with DSI to flatlink LVDS bridge over 2 MIPI DSI lanes with 1000
Mbits/sec per DSI lane
Camera
iMX7 display and camera subsystem, MIPI CSI camera interface
SD-Card
1x SDIO
UART
4x UART, one is used for serial console by default
Serial Peripheral
Interface (SPI)
4x SPI
GPIO
12x General Purpose Inputs/Outputs (GPIO)
other Connectivity
Keypad, 2x CAN
Power
Consumption
Maximum Power consumption of the board is measured to 2 W (Single Core) and 4 W (Dual
Core)
Input Voltage
Wide range VCC 3.0
V to 5.25
V