Kontron SBC-845D-VEA Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 131

background image

Customer Service

Mailing Address:

Kontron - United States
6260 Sequence Drive
San Diego, CA 92121 USA
Tel: 858-677-0877
Fax: 858-677-0895

Technical Support:

U.S. and Canadian Customers - 24 hours a day
Tel: 800-480-0044, option 1
Fax: 858-677-0898

International Customers - 9am to 4pm local time
Tel: (+49) 8165-77 112
Fax: (+49) 8165-77 110

Visit our site at:

www.kontron.com

© 2002 Kontron, an International Corporation. All rights reserved.

The information in this user’s guide is provided for

reference

only. Kontron does not assume

any liability arising out of the application or use of the information or products described
herein. This user’s guide may contain or reference information and products protected by
copyrights or patents and does not convey any license under the patent rights of Kontron, nor
the rights of others.

Kontron

is a registered trademark of Kontron. All trademarks, registered trademarks, and

trade names used in this user’s guide are the property of their respective owners. All rights
reserved. Printed in the United States of America and Canada. This user’s guide contains
information proprietary to Kontron. Customers may reprint and use this user’s guide in other
publications. Customers may alter this user’s guide and publish it only after they remove the
Kontron name, cover, and logo.

Kontron reserves the right to make changes without notice in product or component design as
warranted by evolution in user needs or progress in engineering or manufacturing technology.
Changes which affect the operation of the unit will be documented in the next revision of this
user’s guide.

«
1
2
3
4
...
»

Содержание SBC-845D-VEA




































































































































Отзывы:

Нет отзывов

Похожие инструкции для SBC-845D-VEA

Бренд: Data Modul Страницы: 111

Бренд: SBS Technologies Страницы: 62

Бренд: Steren Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды