Kontron RAK-100S-DNV, Руководство пользователя

Страница: 62 / 77

RAK-100S-DNV - User Guide, Rev. 1.0
www.kontron.com // 62
Figure 29: BIOS Advanced Menu - Serial Port Console Redirection - COM1 Console Redirection Settings*
BIOS SETUP UTILITY
Main Advanced Power Boot Security Save & Exit
COM1
Console Redirection Settings
Terminal Type [ANSI]
Bits per second [115200]
→ ←
: Select Screen
Data Bits [8]
↑ ↓
: Select Item
Parity [None] Enter: Select
Stop Bits [1] +/-: Change Opt.
Flow Control [None] F1: General Help
VT-UTF8 Combo Key Support [Enabled] F2: Previous Values
Recorder Mode [Disabled] F3: Optimized Defaults
Resolution 100x31 [Disabled] F4: Save & Exit
Putty KeyPad [VT100] ESC: Exit
Version 2.19.1266. Copyright (C) 2019, American Megatrends, Inc.
* This submenu appears only when enabling console redirection of COM1 in the previous higher menu.
Feature Option Description
Terminal Type [VT100], [VT100+],
[VT-UTF8], [ANSI] Emulation:
ANSI: Extended ASCII char set.
VT100: ASCII char set.
VT100+: Extends VT100 to support color, function keys, etc.
VT-UTF8: Uses UTFb encoding to map Unicode
Bits per second [9600], [19200],
[38400], [57600],
[115200] Select serial port transmission speed. The speed must be
matched on the other side. Long or noisy lines may require
lower speeds.
Data Bits [7], [8] Select data bits.
Parity [None], [Even], [Odd],
[Mark], [Space] A parity bit can be sent with the data bits to detect some
transmission errors.
Even: parity bit is 0 if the number of 1's in the data bits is even.
Odd: Parity bit is 0 if the number of 1's in the data bits is odd.
Mark: Parity bit is always 1.
Space: Parity bit is always 0.
Stop Bits [1], [2] Stop bits indicate the end of a serial data packet. (A start bit
indicates the beginning). The standard setting is 1 stop bit.
Communication with slow devices may require more than 1 stop
bit.
Flow Control [None], [Hardware
RTS/CTS] Flow control can prevent data loss from buffer overflow. When
sending data, if the receiving buffers are full, a 'stop' signal can
be sent to stop the data flow. Once the buffers are empty, a
'start' signal can be sent to re-start the flow.
VT-UTF8 Combo Key
Support [Disabled], [Enabled] Select whether to enable or disable VT-UTF8 Combination Key
Support for ANSI/VT100 terminals.
Recorder Mode [Disabled], [Enabled] With this mode enabled only text will be sent. This is to capture