MSP8020 Series User Guide Rev. 1.1
www.kontron.com
// 22
4/
Configuring Node Modules
4.1.
Node Reset
To reset the CPU engines of a node:
From the Node CPU serial console
Send a break sequence (ctrl-break)
From the SMWI
Navigate to the target CPU Node
Under Power Commands, select Reset.
From the ShMC CLI
ipmitool>
ipmitool> set targetaddr
<node BMC ipmi address>
ipmitool> power reset (both cpu)
From an IOL remote PC
ipmitool –H
<node BMC ip address>
-U admin –P admin power reset
OR
ipmitool –H
<ShMC ip address >
-U admin –P admin –t
<node BMC ipmi address>
power reset
All tasks described in this section reset both CPUs except the serial port Ctrl-break.
For the node CPU serial console connection, the method is terminal emulator specific, e.g.
with PuTTY, type Ctrl-break or use menu Special command and select Break.
