KBox B-201-CFL - User Guide, Rev. 1.0
// 33
4.
Insert the mPCIe card into the socket at an angle (approx. 30°) and push the mPCIe card into the socket until
the fixing holes of the card align with the mainboard’s solder nut.
5.
Secure the mPCIe by pressing down on the free end and carefully fasten the mPCIe card to the mainboard
with a mounting screw and spacer (if required) between the mPCIe card and the mainboard.
Do not use too much force when fastening the mPCIe expansion card’s mounting screw. Too
much force may damage the mainboard’s solder nut.
6.
Close the Chassis as described in Chapter 6.1: Opening and Closing the Chassis, to close the chassis (steps 1
to 4).
To remove a mPCIe card, perform the following:
1.
Close all applications; shut down the system properly and disconnect the power source. Disconnect all
peripherals.
2.
Open the chassis as described in Chapter 6.1: Opening and Closing the Chassis, to open the chassis (steps 1
to 5).
3.
Locate the installed mPCIe card.
4.
Remove the mountings screw and spacer, and the mPCIe card springs up at the free end.
5.
Gently pull out the mPCIe card from the socket.
6.
Close the chassis as described in Chapter 6.1: Opening and Closing the Chassis, to close the chassis (steps 1
to 4).
Содержание KBox B-201-CFL
Страница 1: ... USER GUIDE www kontron com 1 KBox B 201 CFL Doc User Guide Rev 1 0 Doc ID 1065 0689 ...
Страница 2: ...KBox B 201 CFL User Guide Rev 1 0 www kontron com 2 This page has been intentionally left blank ...
Страница 49: ...KBox B 201 CFL User Guide Rev 1 0 www kontron com 49 Figure 37 KBox B 201 CFL Value Block Diagram ...