Kontron KBox B-201-CFL Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 68

Kontron KBox B-201-CFL Скачать руководство пользователя страница 22

KBox B-201-CFL - User Guide, Rev. 1.0

www.kontron.com

// 22

4.2.1.4.

DP

The Display Port (DP) enables the connection of external digital displays. The DP V 1.2 port is Dual mode/ DP++
compatible, enabling the support of DP to HDMI (p active), DP to DVI (p active) and DP to VGA (active
only) adapters. The number of DP connectors depends on the KBox B-201-CFL variant (Smart or Value) see Figure 5,
pos. 4 and Figure 6, pos. 4.

For the pin assignment, see Chapter 11.5: Display Port (DP) V1.2 Connector Pin Assignment.

To avoid disturbances, it is recommended not to use DP/VGA, DP/DVI or DP/HDMI active
adapters on the DP connectors.

Depending on the KBox B-201-CFL variant up to three digital displays (2x DP + 1x DVI-D) or
up to two digital displays (1x DP + 1x DVI-D) digital displays are supported.

4.2.1.5.

Serial Ports

The serial port connector enables the connection of a RS232 compatible serial device.

For the pin assignment, refer to Chapter 11.10: Serial Port Connector Pin Assignment.

4.2.1.6.

DVI-D

The DVI-D connector supports single link only and enables the connection of a digital display using the DVI-D 24-pin
female connector directly or with an adapter.

For the pin assignment, see Chapter 11.6: DVI-D Connector Pin Assignment.

To avoid disturbances, it is recommended not to use DVI/VGA or DVI/HDMI adapters on the
DVI-D connector.

Depending on the KBox B-201-CFL variant up to three digital displays (2x DP + 1x DVI-D) or
up to two digital displays (1x DP + 1x DVI-D) digital displays are supported.

4.2.1.7.

LAN Ports

The LAN ports are IEEE1588 capable and enable the connection of Gigabit Ethernet (10/100/1000 Mb/s) devices. The
two standard RJ45 connectors including two status LEDs indicating speed and link activity.

For the pin assignment, see Chapter 11.4: LAN GbE Connector Pin Assignment.

«
...
20
21
22
23
24
...
»

Содержание KBox B-201-CFL





































































Отзывы:

Нет отзывов