Kontron ePCI-101, Руководство пользователя, Страница: 70 / 109

4-17
ePCI-101 User’s Guide
Feature Options Description
HPET – High
performance
event timer
Enabled
Disabled
Valid only in Windows XP. Test the high performance event timer
by setting item to enabled. The HPET table will then be pointed to
by the RSDT and the proper enable bits will be set in ICH4.
Base Address
0XFED00000
0XFED01000
0XFED02000
0XFED03000
Select the base address for the high-performance event timer.
Native IDE
support
Disabled
Enabled
Enable native IDE support for Windows XP by setting this item.
The NATA package will be created if this item is set to enabled.
4.1.2.6.5 CPU Control
You can make the following selections on the CPU Control Sub-Menu.
Feature Options Description
Automatic
thermal control
circuit
Disabled
TM1
TM2
Setting this bit enable the thermal control circuit portion of the
thermal monitor feature of the CPU.
TM1= 50 %duty cycle
TM2 = Geyserville III
4.1.2.7 Security Menu
You can make the following selections on the Power Menu. Use the sub menus for other selections.
Feature Options Description
Set User
Password
Enter Password
Pressing <Enter> displays the dialog box for entering the user
password. In related systems, this password gives restricted
access to setup.
Set Supervisor
Password
Enter Password
Pressing <Enter> displays the dialog box for entering the
supervisor password. In related systems, this password gives full
access to setup.
Password on
boot
Disabled
Enabled
Enabled requires a password on boot. Requires prior setting of
the supervisor password. If supervisor password is set and this
option is disabled, BIOS assumes user is booting.
Fixed Disk boot
sector
Normal
Write Protect
Write-protect the boot sector on the hard disk for virus
protection. Requires a password to format or Fdisk the hard disk.
Diskette Access
User
Supervisor
Enable requires supervisor password to access floppy disk.