Kontron ePCI-101, Руководство пользователя, Страница: 54 / 109

4-1
ePCI-101 User’s Guide
4.1 PHOENIX BIOS Setup Program
All relevant information for operating the board and connected peripherals is stored in the CMOS
memory. A battery-backed up memory holds this information when the board is powered off, the
BIOS Setup program is required to make changes to the setup.
4.1.1 Accessing the BIOS Setup Utility
The system BIOS (Basic Input Output System) provides an interface between the operating system
and the hardware of the ePCI-101 SHB. It uses the Phoenix Setup program, a setup utility in flash
memory that is accessed by pressing the <DELETE> key at the appropriate time during system boot.
This utility is used to set configuration data in CMOS RAM.
CAUTION
Before modifying CMOS setup parameters, ensure that the battery protection
tape is removed to enable the CMOS battery back up.
To run the Phoenix Setup program incorporated in the ROM BIOS:
•
Turn on or reboot the system.
•
When you get the following message, hit <DELETE> key to enter SETUP.
PhoenixBIOS 4.0 Release 6.1
Copyright 1985-2002 Phoenix Technologies Ltd.
All Rights Reserved
KONTRON ePCI-101 BIOS Version 1.0