Kontron ePCI-101, Руководство пользователя, Страница: 31 / 109

2-8
ePCI-101 User’s Guide
Bios Settings:
- Main
- Specify disk type
- Advanced \ PCI configuration
- Enable/disable IDE - Device 31, Function 1
CAUTION
1. When using a CompactFlash, the operating temperature must not exceed
50°C/122°F.
2. When connecting a CompactFlash on J15 (primary IDE port) and a hard disk on
J4 (header for the primary IDE port), configure one device as master and the other
as slave. Two master devices (or two slave devices) must not be installed on the
same IDE channel at the same time.
2.3.3 USB Interfaces (J16 & J17)
The USB strengths are as follows: capability to daisy chain as many as 127 devices per interface, fast
bi-directional, isochronous/asynchronous interface, 480Mbps transfer rate, and standardization of
peripheral interfaces into a single format. USB supports Plug and Play and hot swapping operations
(OS level). These user-friendly features allow USB devices to be automatically attached, configured
and detached, without reboot or running setup.
Signal Paths:
USB0 & USB1 signals are available on faceplate through J16 & J17 connector.
Bios Settings:
Advanced \ PCI configuration: Legacy USB Support (keyboard and mouse)
Pin Signal
1 VCC
2 DATA-
3 DATA+
4 GND