Kontron CP3005-SA, Руководство пользователя

Страница: 72 / 102

CP3005-SA – Rev. 0.6 Preliminary
www.kontron.com // 72
Pin Z A B C D E F
out S3#/in
18 NC COMA_RXD/out COMA_DCD#/
out COMA_DTR#
/in COMB_CT
S# /out COMA_CTS#
/out GND
17 NC COMA_TXD/in COMB_RXD/o
ut NC NC NC GND
16 NC COMA_DSR#/ou
t COMA_RTS#/i
n NC RSV COMA_RI#/o
ut GND
15 NC PWR_5VSTDBY/
out RSV NC NC NC GND
14 NC /bi IPA_DA-/bi COMB_RTS#
/in /
bi IPA_DC-/bi GND
13 NC /bi IPA_DB-/bi COMB_RI#/o
ut /
bi IPA_DD-/bi GND
12 NC /bi IPB_DA-/bi RIO_XFO_CT /
bi IPB_DC-/bi GND
11 NC /bi IPB_DB-/bi COMB_DCD#
/out /
bi IPB_DD-/bi GND
10 NC GND COMB_TXD/in VGA_RED/in COMB_D
TR#/in GND GND
9 NC /in GND VGA_HSYNC/
in GND /i
n GND
8 NC SATAATX-/in GND VGA_BLUE/i
n GND SATABTX-/in GND
7 NC GND COMB_DSR#/
out VGA_DDC_D
ATA/bi RSV GND GND
6 NC /out GND VGA_GREEN/
in GND /o
ut GND
5 NC SATAARX-/out GND VGA_VSYNC/
in GND SATABRX-
/out GND
4 NC NC RIO_5V/in VGA_DDC_CL
K/in GPIO_CFG
0/out GND GND
3 NC NC GND NC NC NC GND
2 NC NC NC NC NC NC GND
1 NC NC NC NC NC NC GND
The RIO_XXX signals are power supply INPUTS to supply the rear I/O module with power.
These pins MUST NOT be connected to any other power source, either within the backplane
itself or within a rear I/O module. Failure to comply with the above will result in damage to
your board.
Table 46: Rear I/O Signal Description
Signal Description
COMAx COMA port LVTTL (3.3V)
COMBx COMB port LVTTL (3.3V)
GPIO_CFG0 GPIO or COMB configuration
IPx Gigabit Ethernet copper port