CP3005-SA – Rev. 0.6 Preliminary
// 67
10/
CP-RIO3-04S Rear Transition Module
10.1.
Overview
The rear variant CP3005-SA provides optional rear I/O connectivity for peripherals. Some standard PC interfaces are
implemented and assigned to the front panel and to the rear I/O connector J2 on the CP3005-SA. When the CP-RIO3-
04 rear transition module is used, some signals of main board/front panel connectors are routed to the module
interface.
To support the rear I/O feature, a 3U CompactPCI backplane with rear I/O support is required. The CP-RIO3-04S rear
transition module provides the following interfaces.
Two Gigabit Ethernet ports without LED signals
One COM port
One VGA analog port
Two SATA ports
CompactPCI rear I/O
Power Management
Technical Specifications
Table 42: CP-RIO3-04S Rear Transition Module Specifications
Features
Specifications
External Interfaces
VGA
One VGA interface implemented as a 15-pin, D-
Sub connector, J7
Ethernet
Two Gigabit Ethernet interfaces implemented as
a dual RJ-45 connector without LEDs, J10A/B
Serial
One onboard RS-232 serial ports with 8 pins
(RJ45)
Internal Interfaces
CompactPCI
CompactPCI connector, rJ2, for rear I/O backplane
connection
SATA
Two SATA interfaces implemented as two 7-pin,
L-form standard SATA connectors
Serial
One COM port
Peripheral Control
One 10-pin, 2.54 mm onboard connector for
power supply management, J13
General
Temperature Range
Operational: 0°C to +60°C
Storage: 55°C to +85°C
Climatic Humidity
93% RH at 40°C, non-condensing (acc. to IEC
60068-2-78)
Dimensions
100 mm x 80 mm
Board Weight
120 grams
